Feed Pellet Line

Description:

1~20 t/h Animal Feed Pellet Production Line The animal feed pellet production line is using many kinds of agricultural product to make animal feed pellet,normally capacity range 1~20t/h or more bigger.

Share With:
  • Introduction
1~20 t/h Animal Feed Pellet Production Line
The animal feed pellet production line is using many kinds of agricultural product to make animal feed pellet,normally capacity range 1~20t/h or more bigger.
The animal feed pellet production line apply for raw material:
corn,maize,wheat,cereal,additive,vitamin,etc.. Final product of animal feed pellet production line:
animal/livestock/poultry/fish feed pellet for chicken,pig,sheep,cow,cattle,fish,shrimp,etc. Normally animal feed pellet production line contains:
animal feed pellet production line-Crushing process – Hammer mill

In the feed processing process of animal feed pellet production line there may be a number of ingredients that require some form of processing. These feed ingredients include coarse cereal grains, corn which require particle size reduction that will improve the performance of the ingredient and increase the nutritive value. JLNE Hammer mill is able to produce a wide range of particle sizes, it work with any friable material and fiber and very easy to use. It is used for grinding raw materials by large and medium livestock and aquatic feed mills.
animal feed pellet production line-Mixing process – Feed Mixer 
Efficient mixing is the key to good animal feed pellet production line.The feed will not be the balanced formulation, so it should be well mixed before pelletizing process. JLNE feed mixer is a mechanical means of achieving this. It consists of a series of paddles or metal ribbon blades mounted on a horizontal rotor within a semi-circular trough. The blades move the material from one end of the mixer to the other, tumbling it as it goes. It can mix wet ingredients or mixtures of wet and dry materials, as well as mixing dry ingredients. 
animal feed pellet production line-Pelletizing process – Feed Pellet mill 
Pelletizing is a key process to the animal feed pellet production line as it ensures that the feed formulation is in the correct quantities for all that eat them. It should be mentioned that impurities in the raw materials like metal, may damage the die and rollers of feed pellet mill, so we equipped demagnetizer to remove the impurities. Each bite of a pellet made by our pellet mill will have the same designed formulation ensuring all the stock are feed as intended.
animal feed pellet production line-Cooling and screening process 
The Pellets from pellet mill may exit at up to 88°C and 17-18% moisture. The temperature of pellets must be quickly reduced to make the moisture level to 10-12% or less for proper storage and handling. Pellets must therefore be cooled and dried. Our cooler Adopt counter-flow cooling principle, pellet cooled fully and equally. The temperature of the pellets after cooling is not higher than room temperature +3-5 degree. 
animal feed pellet production line-Packing process 
After cooling process,the pellets will be bagged or stored according to your need and requirement.The packing process of animal feed pellet production line is effectively handled by our Semi-Auto Packing Machine.the finished feed is weighed by the computer,then pneumatically discharge into the bags.Weighed bags would then travel along a conveyor where machines are available for sewing the tops of the bags in which dry feed may be placed for storage. 
animal feed pellet production line-PLC controlling 
All the process above will be controlled and monitored by our advanced computer controlling system. The control center is collected in accordance with the actual value and the current settings for contrast, which will ensure the stability of the whole processing in order to give full play to the pellet plant production capacity and to prevent plugging. 
Please kindly note:
Not all these processes are necessary for you. These are common processes for your reference. we will customize the complete solution as per your raw materials condition and your request for capacity.

Email to this supplier

  • * Your Email :
  • Your tel :
  • Your name:
  • * Your inquiry :